Os X El Capitan Installer App

Posted By admin  On 15.09.21

Warning: Please follow these instructions at your own risk. I am not responsible for any damage or information loss that could result from following this guide. Also, note that installing OS X on PC is illegal. Please buy a real Mac if you're satisfied with your Hackintosh. This guide is for evaluation purposes only.

  • OS X El Capitan supports two methods of installation. The default method is an upgrade install, which will upgrade your Mac to El Capitan while preserving all of your user data and apps.This is the most common means of upgrading the operating system and is recommended when your Mac is in good shape and having no problems.
  • Install OS X El Capitan 10.11.6.app.zip. Install OS X El Capitan 10.11.6.app.zip (5.79 GB) Choose free or premium download. FAST INSTANT DOWNLOAD.

Requirements

  • An Intel-based PC with UEFI bios
  • A USB flash drive with at least 16GB capacity
  • A dedicated hard drive (SSD highly recommended)
  • A computer running OS X (10.9 or later) for preparing the installation USB flash drive

I chose to avoid the UniBeast installer (by Tonymacx86) because of its commercialized nature, as described here. Here is a vanilla guide to installing El Capitan on your PC!

Nvidia Drivers For Mac Os X 10.9. Apt-get For Mac Os X Terminal. Os X El Capitan Download. Download Mac Os X El Capitan Iso For Virtualbox Windows 10. How to download the MAC OS X EL Capitan ISO– As we all know that Mac OS of Apple is the premium Operating System having the most optimum technology.I always prefer Mac over windows just because.

Preparing the USB Installation Drive

First things first. We need to prepare a USB thumb drive that will contain the installation files as well as the bootloader and custom kexts for our specific Hackintosh build.

Download El Capitan from the Mac App Store

Head over to your existing OS X environment running 10.9 or later and open the Mac App Store.

Search for 'El Capitan' and click Download. The download is completely free if you're running OS X 10.9+.

Wait for the download to finish (this could take some time).

Format the USB Drive

Open Disk Utility in Applications/Utilities and locate your USB device. Make sure you've backed up anything important on that drive as it will be erased forever.

Select it, and then on the right, click the partition tab.

  1. Click Curent Layout and change it to 1 Partition.
  2. Set the Name to USB.
  3. Set the Format to Mac OS Extended (Journaled).
  4. Click Options and select GUID Partition Table.

Click Apply to format the drive.

Copy the Installation Files to the USB Drive

Now that we've downloaded the installation files from the Mac App Store and formatted our USB drive, let's copy the installation files to it.

Run the following command in the Terminal (Applications/Utilities):

The command will run a script inside the Install OS X El Capitan application that will copy the installation files to the USB drive.

This process takes about 15 minutes. Go out for a quick run, or a hamburger, or both. When you come back, it should have finished.

Installing a Bootloader

If you tried to boot from the USB drive as is after the previous step on a PC, it wouldn't work. We need a bootloader that makes it possible to boot OS X on x86 and x86_64 PCs.

There are 3 popular bootloaders to choose from.

  • Clover
  • Chameleon
  • Chimera

I went with Clover as it seems to be the most popular choice among other El Capitan installers, mostly for the following reasons:

Clover is an open-source EFI-based bootloader created on Apr 4, 2011. It has a totally different approach from Chameleon and Chimera. It can emulate the EFI portion present on real Macs and boot the OS from there instead of using the regular legacy BIOS approach used by Chameleon and Chimera. For many, Clover is considered the next-gen bootloader and soon it will become the only choice since BIOS in being replaced by UEFI in every new motherboard. One big feature of Clover is that iMessage, iCloud, the Mac App Store works along with Find My Mac, Back To My Mac and FileVault since Clover can use the EFI partition. (Read more)

Install Clover on Your USB Drive

Installing Clover on your USB drive is relatively easy. It involves running an installation wizard and selecting some options.

Download the latest Clover installer from here.

  1. Run the installer.
  2. Click Continue twice.
  3. Click Change Install Location and set it to your formatted USB drive.
  4. Click Customize and check the following options:
    • [x] Install for UEFI booting only
    • [x] Install Clover in the ESP
    • [ ] Drivers64UEFI
      • [x] OsxAptioFixDrv-64 - fixes memory map created by AMI Aptio EFI. Booting OS X is impossible otherwise.
  1. Click Install and wait for the installation to finish. It shouldn't take more than a minute.
Copy Essential Kexts to the USB Drive

Next, we'll need to copy some kexts (kernal extensions, similar to drivers on Windows) to the USB drive.

  • FakeSMC.kext - open source SMC device driver/emulator developed by netkas. Tricks OS X into thinking it's installed on Apple hardware. Absolutely required for Hackintosh installation.
  • NullCPUPowerManagement.kext - disables AppleIntelCPUPowerManagement.kext which may cause kernel panics when you try to boot from the USB drive. It's optional, copy it only if you get an AppleIntelCPUPowerManagement-related kernel panic.
  • ApplePS2Controller.kext and AppleACPIPS2Nub.kext - adds support for PS2 devices (such as PS2 keyboard/mouse). They're optional, copy them only if you still use PS2 devices.

Download these files from here and copy them to the EFI mounted volume at /EFI/Clover/kexts/10.11/.

Now that the installation USB drive is ready, let's install OS X El Capitan!

Boot from the USB Drive

Restart your computer and boot from the USB drive (Press Esc/F8/Del to access the boot selection menu).

Use the arrow keys to select Boot OS X Install from Install OS X El Capitan (It should be selected by default). Press the spacebar and select Boot Mac OS X in verbose mode. Verbose mode means that you'll be able to see exactly what's going on under the hood as OS X attempts to boot up its installer. You'll be able to see the exact error message if booting fails.

Press Enter and cross your fingers. Clover will now boot the installer from your USB drive. This could take some time, in my case, it takes around 5 minutes (Don't worry -- the startup time is around 5 seconds after installing on an SSD).

Did it fail?

It's more than likely that the boot will fail. Don't panic (ha-ha), as kernel panics usually mean that you forgot to copy an essential kext to the EFI partition. Look up the exact error you're getting before the boot log comes to an end and search Google for a solution.

Once you find an additional kext that your system needs, you'd attempt to copy it to the EFI volume, only to discover that it's gone! Not to worry, it's just unmounted and hidden. Follow this guide to mount the hidden partition, and then, follow the Copy Essential Kexts section above to copy it to the USB drive's EFI partition.

Format the Target Hard Drive

Once the installation wizard boots, the next step is to prepare the hard drive that you want to install OS X on.

Click Continue, followed by Disk Utility.

Select the target drive to install to (not the USB drive!) and click the Erase button. Make sure to back up anything important on that drive, as it will be deleted forever.

  1. Set the Name to El Capitan.
  2. Set the Format to OS X Extended (Journaled).
  3. Set the Scheme to GUID Partition Map.

Click Erase to format the drive.

Install OS X to the Target Drive

Exit the Disk Utility and click Install OS X.

Click Show All Disks and select the drive you just formatted to install OS X on it. Finally, click Install.

The process takes about 25 minutes. Be patient. For me, it hung at the end ('1 second remaining') for around 5 minutes. Don't be tempted to reset or cancel the installation.

When that's done, the system will reboot. Make sure to boot from the USB device again, and select Boot OS X Install from Install OS X El Capitan once again, in verbose mode. The installation is a two-part process that continues once you re-boot into the USB drive.

Os X El Capitan Download App Store

Finally, after about 25 more minutes, OS X El Capitan should be successfully installed on the target drive.

Boot into El Capitan via the USB Device

After the second reboot, boot from the USB device once again, but this time, select Boot OS X from El Capitan, and select verbose mode.

Press Enter and cross your fingers again. If all goes well, you'll be presented with the setup wizard:

Take a minute to set up your new Hackintosh. Once you're done, there are a few things you need to do to finish off the installation.

Mac Os X El Capitan Iso Download

Reinstall Clover on the Hackintosh Drive
Download el capitan 10.11

In the previous step, we used Clover on our USB drive to boot our Hackintosh. This is fine, but most of us aren't going to keep that USB drive plugged in forever. Let's make it possible to boot El Capitan independently by reinstalling Clover on it.

Go back up to the Install Clover on Your USB Drive section and follow the steps again, but this time, select your El Capitan volume instead of the USB drive.

Once again, copy the essential kexts to the EFI partition that shows up after installing Clover.

Finally, make sure to add Clover EFI boot options which is possible by pressing Clover Boot Options in the Clover boot window (if there are 2 boot options -- find the one for your SATA drive). I literally spent 3 hours figuring out why Clover would not boot when I disconnected the USB drive before I figured out that I need to manually add the EFI boot options.

Now you'll be able to boot directly from the El Capitan hard drive, as it should be!

Audio and Networking

If you're lucky, audio and networking will work right out of the box. If not, you're on your own from here. You'll need to research your exact hardware (by using System Information in Applications/Utilities) and searching Google to find the right kext or installer to make it work on El Capitan.

Clover Themes

The default Clover theme is pretty ugly (no offense). Check out this theme database to improve Clover's appearance.

This is YosemiteLogin by xenatt:

Enjoy!

That's it! Enjoy your new Hackintosh, and if you absolutely love it, consider buying a Mac!

The new OS X El Capitan features a new Split View, features in Safari, Mail, Notes, Maps, and Photos, and more. To get your hands on all this new stuff, you have to install the operating system on your Mac.

What Is Mac OS X El Capitan? This is the twelfth release from the Apple software stable. It succeeds OS X Yosemite and focuses on stability, performance, and security. As from the end of September 2015, it was released to end users, free of charge, from theMac App Store. Features Of Mac OS X El Capitan System Integrity Protection. How to Perform a Clean Install of OS X El Capitan. OS X El Capitan (OS X 10.11) offers two installation methods. This guide focuses on the 'clean install' method. When you install El Capitan on your current startup drive with the clean install method, you erase everything on the drive. That includes OS X, your user data, and personal files. I copied the CodeSignature folder from inside Install OS X Mountain Lion.app to the same position inside Install OS X El Capitan.app on the Flash drive. 4) Restart the Mac with option (alt) key pressed and you will be presented with bootable volumes. Select your Flash Drive using the keyboard arrow keys and press enter. Give it 5 mins to boot up.

If you want to perform a typical OS upgrade, it’s easy. You download it through the App Store. Here, we’ll go through the steps of installing EL Capitan from Yosemite.

It’s about preparation

Mac Os X El Capitan Install Disk Windows 7

Before you install the upgrade, there’s a little bit of prep work you should do. Our article on how to get your Mac ready for OS X 10.11 El Capitan is what you should read before you proceed. It covers:

Mac os x el capitan installer app
  • Compatible hardware and older versions of OS X
  • Verifying the health of your Mac
  • Installing updates
  • Backups
  • Encryption issues

Go read that article and come back here when you’re ready to go.

How to download El Capitan

Apple provides the El Capitan upgrade through its App Store. The download is a bit over 6GB, so you may want to download it at a time when you have other things to do—how long the download takes depends on your Internet connection and the amount of activity at the App Store. Or you can use your Mac while you wait, but be ready to save your work and quit when the download is done.

To download El Capitan, launch the App Store app in your Applications folder (or go to Apple menu > App Store). You’ll probably find El Capitan right away, especially if go to the App Store soon after the official release. Apple will probably have a banner at the top promoting El Capitan, but if you don’t see one, you can probably find it in the Free section in the far right column (you might have to scroll down to see it). And you can always do a search on El Capitan.

When you get to the El Capitan page in the App Store, click on the Download button. You may have to enter your Apple ID name and password, and after you do, the installer will download.

Copy the installer

Mac Os X El Capitan Install Disk Usb

Mac Os X El Capitan Install Disk For Sale

When the download finishes, the installer automatically launches. Mac app windows. Don’t click Continue in the installer just yet. What you may not know is that the installer is downloaded to your Applications folder and then deleted after the installation is done.

If you ever need the installer again, you can get it in the App Store. But I like to make a copy of the installer. I often have to perform OS installations, so I make a bootable flash drive that I can use; it’s a lot faster than waiting for the download.

To copy the installer, you need to hold down the Option key as you drag the Install OS X El Capitan app in your Applications folder to the copy destination. If you don’t hold down Option, you’ll create an alias, not a copy.

Install El Capitan

OK, now you can click that Continue button in the installer window. (If the installer isn’t running, go to your Applications folder and double click the Install OS X El Capitan app.) You’ll be asked to agree and then confirm that you agree to the license agreement.

The next screen will ask you to select the disk for the El Capitan installation. If you have one storage device with one partition, you’ll see it in the installer window. But if you have multiple storage devices and/or multiple partitions, you can select the one you want by clicking the Show All Disks button. Make your selection and click Install.

To continue, you must enter your username and password. The install will prepare to install, restart your Mac, and perform the installation. The Mac may restart again during the installation process. The install will take several minutes, so you may want to go for a walk, call your mom, take a nap, or catch up on chores while the software does its thing.

When the installation is finished, the Mac will restart and you’ll need to log in with your username and password. You may be asked if you want to send diagnostic data to Apple and that you need to log in with your Apple ID, and then a setting up screen will appear and go away. You’re done.

Want to do a clean install of El Capitan?

A clean installation is when you install the operating system on a blank storage device. You can do this by creating a bootable El Capitan installer, and then use it as the boot drive for your Mac. You run Disk Utility to erase your drive and then proceed with the El Capitan installation.

Once the installation is done, you use Migration Assistant to transfer your data from a Time Machine backup.

Why should you do a clean install? Maybe you partitioned your storage device and want to change the scheme. Or maybe you’ve installed and removed lots of apps over time and want to get right of any lingering software components—if this is the case, don’t restore your data from a Time Machine backup. Manually copy your files and reinstall your software.